28-framed Honey Extractor with half-turned for "Ruta" frames

 28-framed Honey Extractor with half-turned for "Ruta" frames
Price: 0.00 грн.
Qty:     - OR -   Add to Wish List Add to Compare
The speciality of this extractor is rotor construction. It has separate plating. During the rotation, cassettes border not on rotor rim, but on separate plating, which ryly on cassettes. In such way, more cassettes are placed in the same diameter. 
The angle of cassettes turn is not big, the extractor looks like the radial extractor as the cells are also under not large angle to horizon, in this way the turn promotes better honey pumping. The extractor consists of a drum with tops, stands, electric drive, rotor with cassettes, rectiformer, display unit and drain tap. 
Electric drive is like a gear motor, mounted on the extractor axle below. Power supply of electric motor is 24 V  of direct current can be realized from AC main 220 V through rectiformer which is set on the  bottom of the extractor or from two placed in series accumulators 12 V.
Cassettes with frames are automatically set inoperative radially inboard and turn during the extractors rotor spinning on one or another part depending on rotor spinning direction. Extractor operation is set by appropriate  pinch on the display unit. The extractor can work manually or automatically.

 
Basic technical data
Electric engine supply current, direct V 24
Electric motor productivity, W 300 
Program control quantity 6+manual mode
Productivity (according to P5 if time for loading and unloading ~1 min) frame/ hour 200 
Weight no more, kg 132
Honey extent, that accumulated in the extractor between its obligative draining off (level of lower rotor spokes) 100 
Angle of cassette turn 46о7' 
Distance from spin axis of extractor to the centry (R) mm  440 


т. О – spin axis (extractor axis)

т. 1 – cassette centre
 
Overall dimensions, mm
Drum diameter 1200
Extractor height 1110
Width 1400
Desired door width for carrying the extractor into the building, mm
(knocked down - 800 mm)
1200
 

Extractor operation in manual mode 
Speed, direction and time in this mode is set on a control box console manually with the help of relevant pinches. After the rotation in one of the sides is finished or pushing a button "Stop" the delay 22 seconds is in operation. After the stop, when the button indicator is lighting "Stop" the access to further work with a control box console will be possible, for example, switching-on reverse or menu access of  programming.

 
Manual mode specification
Speed range/min 50....160
Working time, min 0...5
Direction of rotation Forward/Backward

Extractor operation in automatic mode
For extractor operation in automatic mode it is neccessary to choose one of the programmes (P1;P2;P3;P4;P5;P6). Rotation speed, turning quantity and also pumping time are programmed at the manufacture and it is unchanged for every programme. After the rotation is finished in one the sides, as in manual mode, the delay 22 seconds is in operation.

Automatic mode specification
  Programme                        Direction of rotation 
Forward Backward  Forward Backward
Р1    U/min. 80 110 110  
Working time (min) 1,5 1,5 1,5  
Р2 U/min. 80 130 130  
Working time (min) 1,5 1,5 1,5  
Р3 U/min. 80   80 150 150
Working time (min) 1 1 1,5 1,5
Р4 U/min. 80    110 110  
Working time (min) 1,5 1,5 1,5  
Р5 U/min. 110  110    
Working time (min) 2 2    
Р6 U/min. 130 130     
Working time (min) 2 2    
 
Commercial designation Bulk materials Unique extractor features
Drum Cassettes Rotor
28HRAOM2 stainless steel welded stainless steel stainless steel with a top and display unit Model 2 АВ
(see Automatic 8-frame extractor 'Rut")